DR-680MKII
Linear PCM Field Recorder
The DR-680MKII is a portable multi-channel recorder that allows simultaneous recording up to 8 tracks at 96kHz/24-bit, coming equipped with 6 mic/line inputs and digital input channels.
Equipped with a TASCAM-developed high-sound quality HDDA (High Definition Discrete Architecture) microphone amplifier, the DR-680MKII has improved the sound quality of its op-amp and condensers through extensive listening tests.
The DR-680MKII allows high-sound quality multi-channel recording using multiple microphones at various settings such as drama and documentary productions, on-field recording, SE recording, and live concert recordings.
This model has been discontinued in North, Central and South America. Please check the availability with your local distributors in other areas.
Features at a Glance
- SD/SDHC/SDXC cards used as recording/playback media
- 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
- 6 unbalanced outputs (RCA pin jacks)
- COAXIAL digital input and output (S/PDIF, AES/EBU)
- Recording/playback formats: BWF, WAV, MP3
- With BWF format, recording starting times can be stored in files
- 8-track recording at 96kHz/24-bit (BWF, WAV)
- 6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording
- Record MP3 files at 96, 128, 192 and 320 kbps
- Record 4-channel MP3 files
- From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs
- 2-track recording at 192kHz/24-bit (BWF, WAV)
- From 2 mic/line inputs or digital stereo inputs
- Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
- Sampling frequencies
- 44.1k, 48k, 96k, 192k Hz (BWF, WAV) 44.1k, 48k Hz (MP3)
- Quantization bit depth: 16/24-bit (BWF, WAV)
- 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
- Limiter and low-cut filter available on each mic/line input
- Built-in stereo monitoring mixer for headphone mix and/or recording
- Dual-recording function allows two files to be recorded simultaneously at different levels
- GANG function allows the input gain of multiple channels to be operated simultaneously
- Pre-recording function allows the capture of audio two seconds before recording is started
- Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
- Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
- Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
- Up to 1000 takes and 5000 files can be recorded on a single card
- Mark function can be used to move to specific points (up to 99 marks per take)
- Wheel can be used to change the playback position
- Repeat playback function
- Panel lock function to prevent misoperation
- Cascade function allows transport control of multiple DR-680MKII units using a master unit
- File name format can be set to use a user-defined word or the date
- High-speed transfer of files to a computer using USB2.0
- 128×64-dot matrix display with backlight
- Built-in mono speaker with 500mW output
- Headphone output and level control (50mW+50mW/ 32ohm)
- Powered by 8 AA batteries or the included AC adapter
- USB cable and shoulder strap included
- Folding stand convenient for tabletop use
- CS-DR680 carrying case (sold separately)
- AR-DR680 case by Portabrace also available
Spec Description
Recording media | SD card (64MB to 2GB) SDHC card (4GB to 32GB) SDXC card (64GB to 128GB) |
File system | FAT16 / FAT32 |
Recording format | |
WAV | 44.1k / 48k / 96k / 192k Hz, 16 / 24-bit *192kHz: 2ch recording/playback |
BWF | 44.1k / 48k / 96k / 192k Hz, 16 / 24-bit *192kHz: 2ch recording/playback |
MP3 | 44.1kHz, 16-bit, 96k to 320k bps |
Analog audio inputs | |
MIC/LINE (BALANCED) | |
Connector | |
Ch 1-4 | XLR-3-31 / 1/4" (6.3mm) TRS Phone Combo jack × 4 (1: GND, 2: HOT, 3: COLD) |
Ch 5-6 | 1/4" (6.3mm) TRS Phone jack × 2 |
Set to MIC | |
Input impedance | 2.4kΩ |
Phantom power | +48V (+5%, –10%), +10mA/Ch |
Standard input level | |
LOW | –51.5dBu |
HIGH | –75.5dBu |
Maximum input level | |
LOW | +3dBu |
HIGH | –21dBu |
MIC input gain | 63dB |
Set to LINE | |
Input impedance | 10kΩ |
Standard input level | +4dBu |
Maximum input level | +24dBu |
LINE input gain | 63dB |
Analog audio output | |
LINE OUT (UNBALANCED) | |
Connector | RCA Pin jack × 6 |
Output impedance | 200Ω |
Standard output level | –10dBV |
Maximum output level | +6dBV |
Phones | |
Connector | 1/4" (6.3mm) Stereo Phone jack × 1 |
Maximum output level | 50mW + 50mW (32Ω loaded) |
Speaker | |
Diameter | 35 mm |
Impedance | 8Ω |
Maximum output level | 500mW |
Digital Input/Output | |
Connector | RCA Pin jack × 1 |
Format | IEC60958-3 (S/PDIF), AES3-2003 (AES/EBU) |
Single | 44.1k / 48k Hz |
Double | 96kHz |
Quad | 192kHz |
Level | 0.5 Vp-p typical |
Output impedance | 75Ω ±20% unbalance |
SYNC Input/Output | |
Connector | RCA Pin jack × 1 |
USB | |
Connector | USB Mini-B type × 1 |
Format | USB2.0 HIGH SPEED (480Mbps) |
Power | 8 AA batterie s(LR6) AC100 - 240V, 50/60Hz |
Power consumption | 8W (Phantom power on) |
Continuous operation time | * All times are approx.mate. |
Alkaline batteries (EVOLTA) |
6 hours (Rec: 2ch, Phantom power OFF) 4.5 hours (Rec: 2ch, Phantom power ON) 3.5 hours (Rec: 6ch, Phantom power ON) |
NI-MH batteries (eneloop) |
<5.5 hours (Rec: 2ch, Phantom power OFF) 4.5 hours (Rec: 2ch, Phantom power ON) 4 hours (Rec: 6ch, Phantom power ON) |
Lithium batteries (Energizer ULTIMATE LITHIUM) |
11 hours (Rec: 2ch, Phantom power OFF) 9.5 hours (Rec: 2ch, Phantom power ON) 7.5 hours (Rec: 6ch, Phantom power ON) |
Dimensions | 8.5" × 2.2" × 7.4" / 216.4 × 56 × 188.4 mm |
Weight | 3.1 lbs. / 1.4 kg (including batteries), 2.6 lbs. / 1.2 kg (excluding batteries) |
Operating temperature | 32˚F to 104˚F / 0˚C to 40˚C |
Standard accessories | AC adaptor, USB cable, Shoulder strap, Owner's manual including warranty card |
Audio performance
Frequency response | 20Hz to 20kHz +0.5/–1.5dB (Fs 44.1kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 20kHz &plulsmn;0.5dB (Fs 48kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 40kHz +0.5/–1.0dB (Fs 96kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 80kHz ±5.0dB (Fs 192kHz, LINE IN to LINE OUT, Input Level=FS–1dB) |
Distortion | 0.007% (1kHz, LINE IN to LINE OUT) |
S/N ratio | 100dB (A-Weight, MIC IN to DIGITAL OUT) 100dB (A-weight, LINE IN to LINE OUT) |
EIN | –124dBu or less |
Computer compatibility
Windows | Windows XP, Windows Vista, Windows 7, Windows 8 |
Macintosh | Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8) |
DR-680MKII Tested media List
Last update:July 24, 2015 |
Maker | Series | Model | Capacity | Result |
SanDisk | SanDisk Extreme PRO® SDHC™/SDXC™ UHS-I Memory Card (U3, Class10) |
SDSDXPA-128G-JU3 | 128GB | OK |
SDSDXPA-064G-JU3 | 64GB | OK | ||
SDSDXPA-032G-JU3 | 32GB | OK | ||
SDSDXPA-016G-JU3 | 16GB | OK | ||
SanDisk Extreme® SDHC™/SDXC™ UHS-I Memory Card (U3, Class10) |
SDSDXL-064G-JU3 | 64GB | OK |
Maker | Series | Model | Capacity | Result |
SanDisk | SanDisk Extreme PRO® SDHC™ UHS-II Memory Card |
SDSDXPB-032G-J35 | 32GB | OK |
SDSDXPB-016G-J35 | 16GB | OK | ||
SanDisk Extreme PRO® SDHC™ UHS-I Memory Card (Class10) |
SDSDXPA-032G-J35N | 32GB | OK | |
SDSDXPA-016G-J35N | 16GB | OK | ||
SanDisk Ultra® PLUS SDHC™ UHS-I Memory Cards (Class10) |
SDSDUP-016G-J35 | 16GB | OK | |
SDSDUP-008G-J35 | 8GB | OK | ||
Panasonic | SDHC™ Memory Card (UHS-I / Class10) R:90MB/s W:45MB/s |
RP-SDUC32GJK | 32GB | OK |
Documents
Manuals
DR-680MKII Owner's Manual | 06-25-2019 |
|
---|
Spec
CAD outline DXF | 01-22-2015 |
|
|
---|---|---|---|
Specifications | 01-22-2015 |
|
Firmware / Software
Instructions
Release Note | 01-14-2016 |
|
---|
Firmware
Firmware V1.02 | 01-14-2016 |
|
---|
Software
Poly/Mono Converter for Windows | 03-13-2013 |
|
---|
Compatibility
SD Supported Media | 10-31-2023 |
|
---|