MH-8
8-channel Headphone Amplifier
For the ultimate in routing flexibility and power, nothing beats the MH-8 headphone amp from TASCAM
- 8 stereo 1/4" headphone outputs
- 250mW + 250mW at 32Ω per channel
- Each headphone output switchable to input 1, input 2 and direct input source (or a combination of the three)
- 4 TRS balanced foldback outputs
- Power consumption : 36W
- Dimensions : 482(W) mm×44(H) mm×280(D) mm
- Weight : 3.8kg
- Main unit × 1
- Power cord × 1
- A rack-mounting screw kit × 1
- A warranty card × 1
- Owner's manual × 1
TASCAM's MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other MH-8s into a system.
Wide Range of Input Terminals That Support all Kinds of Inputs Sources
The MH-8 has a range stereo inputs that support various input sources; INPUT1 is equipped with XLR balanced and TRS balanced inputs, while INPUT 2 is equipped with XLR balanced and RCA-pin unbalanced inputs, and DIRECT INPUT from each headphone comes with TRS balanced inputs. The input jacks are also compatible with audio system of facilities, in-store audiovisual systems, and recording studio monitoring systems.
Features at a Glance
- 8 stereo 1/4" headphone outputs
- 250mW + 250mW at 32Ω per channel
- Each headphone output switchable to input 1, input 2 and direct input source (or a combination of the three)
- Master input gain controls
- 16 1/4" TRS balanced direct inputs
- 4 XLR balanced inputs (CH1 & CH2)
- 2 1/4" TRS balanced inputs (CH1)
- 2 RCA unbalanced inputs (CH2)
- 4 TRS balanced foldback outputs
- Ground lift switch and terminal
Applications
- Music retailer listening station
- Recording studio monitoring
- In-ear stage monitor distribution
- Tradeshow headphone distribution
Find a Local Dealer
LEARN MOREPair with your MH-8
You might also like
Spec Description
Audio Inputs/Outputs | |
INPUT 1 and 2 | |
Connector | XLR-3-31 (1: GND, 2: HOT: 3: COLD) × 2 pairs |
Input impedance | 56kΩ |
Nominal input level | +4dBu (1.23mV) |
Maximum input level | +24dBu (12.3V) |
INPUT 1 | |
Connector | 1/4" (6.3mm) TRS Phone jack (Top: HOT, Ring: COLD, Sleeve: GND) × 1 pairs |
Input impedance | 56kΩ |
Nominal input level | +4dBu (1.23V) |
Maximum input level | +24dBu (12.3V) |
INPUT 2 | |
Connector | RCA Pin jack × 1 pair |
Input impedance | 22kΩ |
Nominal input level | –10dBu (0.3V) |
Maximum input level | +10dBu (3.16V) |
DIRECT INPUT | |
Connector | 1/4" (6.3mm) TRS Phone jack (Top: HOT, Ring: COLD, Sleeve: GND) × 8 pairs |
Input impedance | 56kΩ |
Nominal input level | +4dBu (1.23V) |
Maximum input level | +24dBu (12.3V) |
FOLDBACK OUT | |
Connector | 1/4" (6.3mm) TRS Phone jack (Top: HOT, Ring: COLD, Sleeve: GND) × 2 pairs |
Input impedance | 94kΩ |
Nominal input level | +4dBu (1.23V) |
Maximum input level | +24dBu (12.3V) |
PHONES OUT | |
Connector | 1/4" (6.3mm) Stereo Phone jack × 8 |
Maximum output level | 250mW + 250mW (32Ω) |
Power | AC 100 - 240V, 50/60Hz |
Power consumption | 36W |
Dimensions (W×H×D) | 19.0" × 1.73" × 11.0" / 482 × 44 × 280 mm |
Weight | 8.4 lbs. / 3.8 kg |
Included items | Power cord, Rackmounting screw kit, Owner's manual (with warranty) |
Audio performance
Frequency response | |
PHONES out | 20Hz to 50kHz/100mW, 32Ω ±3dB |
FOLDBACK out | 10Hz to 100kHz ±3dB |
S/N ratio | |
PHONES out | 85dB or greater (A-weighted, 20kHz, LPF) |
FOLDBACK out | 90dB or greater (A-weighted, 20kHz, LPF) |
THD | |
PHONES out | 0.05% or less (when outputting 100mW + 100mW 32Ω, 20Hz HPF and 20kHz LPF) |
FOLDBACK out | 0.07% or less (20Hz HPF and 20kHz LPF) |
Channel separation | |
PHONES out | 50dB or greater (within a channel, A-weighted, 20kHz LPF, 1kHz nominal inout and output, 32Ω termination) |
FOLDBACK out | 90dB or greater (A-weighted, 20kHz LPF, 1kHz nominal inout and output, 600Ω termination) |
Crosstalk | |
PHONES out | 65dB or greater (A-weighted, 20kHz LPF, 1kHz nominal inout and output, 32Ω termination) |
Documents
Manuals
MH-8 Owners Manual | 01-25-2011 |
|
---|
Spec
CAD outline(DXF) | 09-15-2010 |
|
---|
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 |
|
---|
Select your country or region.
Asia, Oceania
Middle East & Africa