ML-16D
16-channel Analog/Dante Converter
A powerful and flexible solution The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
- Dante focused interface for connection of external audio into or out of a Dante audio network
- 16 channel analog line input and 16 analog line outputs (48k/96kHz) using four D-Sub connectors
- Dante primary and secondary connectors support redundancy
- Up to 96kHz/24-bit quality
- Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
- 1U rack mount size
- Power consumption : 14W
- Dimensions : 483(W)×45(H)×303.8(D)mm
- Weight : 3.3kg
- ML-16D × 1
- Power cord × 1
- Rackmount screw kit × 1
- Owner's Manual (including warranty) × 1
Primary and Secondary Network Connections Redundancy and Security
Primary and secondary connectors enable building a redundant system with a duplex network. Should the primary network route fails the ML-16D automatically switches to the secondary network route. This highly secure system prevents interruption and introduces no noise during the switch.
Integrated Signal/Overload indicator
The front panel is equipped with a signal/overload indicator that enables monitoring of analog input/output signals. The signal indicator turns on when a signal level becomes lower than –60dBFs.
Flexible Choice of Connectors According to Purposes
ML-16D is equipped with D-sub 25-pin connectors as analog line input/output connectors, and combining with optional breakout boxes enables conversion to Euro Block and XLR.
Additional Features
About Dante
Read More
Flexible Routing to Connected Dante-Compatible Devices
Read More
Possible to Interconnect With AES67 and Ravenna Systems
Read More
5 Selectable Reference Levels Which can Accommodate to a Variety of Scenes
Read More
Example of Conversion Using Euro Block Breakout Box
Read More
Example of XLR Connector Conversion Using XLR IN Breakout Box and XLR OUT Breakout Box
Read More
Features at a Glance
- Dante focused interface for connection of external audio into or out of a Dante audio network
- 16 channel analog line input and 16 analog line outputs (48k/96kHz) using four D-Sub connectors
- Dante primary and secondary connectors support redundancy
- Up to 96kHz/24-bit quality
- Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
- Reference level dip switches for selectable DBu level metering
- Firmware updatable via Dante port
- 1U rack mount size
- Optional BO-32DE (D-sub/Euro Block breakout box) supports Euro Block connectors
- Optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) support XLR connectors
