MM-2D-X
2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer
Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene.
- 2-channel mic/line input with phantom power (+48v) support (XLR)
- Supports remote mic gain control
- 2 line output
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
For simple control: simple app design for only the necessary functions such as area volume settings, etc. - Half-rack mountable size
- Equipped with signal indicators that monitor line input/output signals
- Power : PoE class 0, TASCAM PS-P1220E
- Power consumption : 6W
- Dimensions : 214(W) × 44.45(H) × 136.1(D)mm
- Weight : 878g
- MM-2D-X × 1
- Installation brackets × 2
- Owner's Manual (including warranty) × 1
2 Mic/Line Input/Output, 4 Dante Input/Output
The MM-2D-X can either convert 2-channel mic/line input signals into 2 Dante output signals, or 2 Dante input signals into 2-channel line output signals. In addition, it also supports 4-channel Dante input/output as well, making it possible to use audio sources within an established Dante network.
Phantom Power And Remote Gain Control Compatible Mic Preamps
The installed mic preamps support phantom power (+48V) and the input gain can be remote controlled via TASCAM DCP CONNECT software, via Dante or other external controllers.
TASCAM Studio Quality Mic Preamps Installed
The MM-2D-X has installed two natural-sounding, high grade TASCAM mic preamps made with all the knowledge and experience cultivated through the years in the making of pro audio equipment. Input range covers from -74 dBu to +26 dBu, with equivalent input noise achieving less than -125 dB, and signal-noise ratio over 105 dB.
Compressor, 4 Band Parametric EQ, Auto Level, And More Effects Included
They can be finely adjusted depending on the mic/line equipment used.
Built-In 6 In/4 Out Matrix Mixer
Using the built-in matrix mixer, users can mix up to 6 input sources (2-channel mic/line inputs with 4-channel Dante inputs) and configure the settings on each of the four output zones. The matrix mixer is also equipped with a ducking function and an ambient noise compensator function, which detects the level of environmental sounds and automatically adjusts the input level of the source.
Input/Output Routing
Flexible routing allows users to choose the output zone of 2 mic/line inputs, 4 Dante inputs, or the built-in matrix mixer as 2 line output and/or 4 Dante output. The MM-2D-X can also be used as a simple mic/line input unit by bypassing the matrix mixer.
10 Band EQ and a Variety of Output Effects Included
10 band EQ, high pass filter, low pass filter, delay, and limiter effects included. They can be finely adjusted depending on the powered speakers, or to the environment in which the unit is used.
PoE Supported
Power supply can be provided to the unit via PoE (Power over Ethernet).
No need for AC adaptors; power supply construction fees and installation costs can be reduced by using a PoE compatible network switch.
Remote Control via Control Software
Controlling effects or the matrix mixer can be easily done through the dedicated control software; depending on the amount of controls the user needs, there are two types:
- TASCAM DCP CONNECT, designed for system integrators/managers that handle the configuration and settings of an entire system.
- TASCAM EZ CONNECT, designed for end-users and allowing them to use simple controls.
Additional Features
Flexible Routing
Routing to each Dante device is easy via Dante controller. Input/output units can be added flexibly to new or already established Dante systems.
Installable According to Usage/Environment
Units can be easilly installed directly under desks or on walls with the included surface mount adaptors.
Optional Rack Mount
With the optional rack-mountable shelf AK-RS1, up to two Dante Compact Processor models can be installed in a 19 inch rack space.
Scene Preset
Effect parameters, mix levels, input/output routings, etc. settings can be saved as up to 50 different presets by the scene preset function. This function allows switching different presets seamlessly in different environments.
Features at a Glance
- 2-channel mic/line input with phantom power (+48v) support (XLR)
- Supports remote mic gain control
- 2 line output
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Up to 24bit/96kHz
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 6 in/4 out matrix mixer)
- Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
- Flexible scene preset function allows to work in different area situations (Up to 50 presets)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
For simple control: simple app design for only the necessary functions such as area volume settings, etc. - Remote control via Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor line input/output signals
- Configurable reference level (via remote control only)
- Surface rack mountable angles for installation under desks included
- Optional accessories:
AC adapter PS-P1220E for redundant power supply available
Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19 inch rack case
Find a Local Dealer
LEARN MOREPair with your MM-2D-X
You might also like
Spec Description
General | |
Formats and channels | 44.1/48/88.2/96kHz,16/24-bit, 2 channels |
Input/output ratings | |
DATA/DATA+PoE connectors | |
Connector | RJ-45 |
Transmission protocol | Dante |
Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
Cables | category 5e or faster STP cables |
ANALOG IN connectors | |
Connector | XLR-3-31 (1: GND, 2: HOT, 3: COLD) |
Minimun input level | -74 dBu |
Maximum input level | +26 dBu |
Input impedance | 2.0 kΩ or higher |
ANALOG OUT connectors | |
Connector | XLR-3-32 (1: GND, 2: HOT, 3: COLD) |
Nominal output levels | +4 dBu (when Ref. Level not -9 dBFS) +6 dBu (when Ref. Level set to -9 dBFS) |
Maximum output level (switchable) | +15 dBu (Ref. Level: -9 dBFS) +18 dBu (Ref. Level: -14 dBFS) +20 dBu (Ref. Level: -16 dBFS) +22 dBu (Ref. Level: -18 dBFS) +24 dBu (Ref. Level: -20 dBFS) |
Output impedance | 200 Ω or lower |
Other | |
Power | PoE class 0 TASCAM PS-P1220E AC adapter (sold separately) |
Power consumption | 6W |
Dimensions | 214 x 44.45 x 136.1 mm (W x H x D, including protrusions) |
Weight | 878 g |
Operating temperature range | 0°C-40°C |
Included items | Installation brackets, Owner's manual (including warranty) |
Audio performance
MIC IN → DANTE OUT | |
Mic amp EIN (equivalent input noise) | -125 dBu (150Ω, 22kHz LPF+A, JEITA) |
Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
Distortion (THD+N) | 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
S/N ratio | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Dynamic range | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
DANTE IN → LINE OUT | |
Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
Distortion (THD+N) | 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
S/N ratio | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Dynamic range | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Note: JEITA indicates compliance with JEITA CP-2150
MM-4D/IN, ML-4D/OUT, MM-2D, AE-4D Comparison Chart
Input Channels
Products | Analog (Mic/Line) | Digital (AES/EBU) | Digital (Dante) |
MM-4D/IN-X | 4ch | - | 4ch |
MM-4D/IN-E | 4ch | - | 4ch |
ML-4D/OUT-X | - | - | 4ch |
ML-4D/OUT-E | - | - | 4ch |
MM-2D-X | 2ch | - | 4ch |
MM-2D-E | 2ch | - | 4ch |
AE-4D | - | 4ch | 4ch |
Output Channels
Products | Analog (Line) | Digital (AES/EBU) | Digital (Dante) |
MM-4D/IN-X | - | - | 4ch |
MM-4D/IN-E | - | - | 4ch |
ML-4D/OUT-X | 4ch | - | 4ch |
ML-4D/OUT-E | 4ch | - | 4ch |
MM-2D-X | 2ch | - | 4ch |
MM-2D-E | 2ch | - | 4ch |
AE-4D | - | 4ch | 4ch |
Input/Output/GPI Connectors
Products | Analog | Digital (AES/EBU) | Digital (Dante) | GPI |
MM-4D/IN-X | XLR | - | RJ45 | - |
MM-4D/IN-E | Euroblock | - | RJ45 | Euroblock |
ML-4D/OUT-X | XLR | - | RJ45 | - |
ML-4D/OUT-E | Euroblock | - | RJ45 | Euroblock |
MM-2D-X | XLR | - | RJ45 | - |
MM-2D-E | Euroblock | - | RJ45 | Euroblock |
AE-4D | - | XLR | RJ45 | - |
Information
Latest version info | |
Firmware | V1.04 |
Dante Module Firmware | V1.2.0.6 |
- In firmware V1.03 and earlier, when the total amount of packet data sent/received exceeded 2 GB due to prolonged operation after power-on, the network connection would become unavailable or the network would be disconnected.
This issue has been fixed in V1.04.
- In V1.2.0.5, remote connection could still become interrupted on networks where multicast was used. This problem was confirmed and fixed.
Notices About Products
Documents
Manuals
Owner's Manual Addendum V1.1.0 | 10-07-2019 |
|
|
---|---|---|---|
Owner's Manual (English, Français, Español, Deutsch, Italiano, Japanese) | 02-07-2019 |
|
Spec
RS-232C/ETHERNET Protocol Specifications | 04-02-2019 |
|
|
---|---|---|---|
CAD outline (PDF) | 02-05-2019 |
|
|
CAD outline(DXF/PDF) |
|
||
MM-2D-X Specifications |
|
||
AK-RS1 CAD outline(DXF/PDF) | 02-05-2019 |
|
Catalogs
MM-2D Leaflet | 04-25-2019 |
|
|
---|---|---|---|
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 |
|
Firmware / Software
Instructions
Release Notes | 12-18-2023 |
|
|
---|---|---|---|
Dante Module Firmware Release Notes | 04-27-2022 |
|
|
Firmware update procedures | 12-25-2019 |
|
|
Dante Module Firmware Update Procedures | 10-07-2019 |
|
Firmware
Firmware V1.04 for Windows | 12-18-2023 |
|
|
---|---|---|---|
Firmware V1.04 for macOS X | 12-18-2023 |
|
|
Dante Module Firmware V1.2.0.6 | 04-27-2022 |
|
|
Dante Module Firmware V1.2.0.5 | 10-22-2020 |
|
Software
TASCAM DCP CONNECT | 12-25-2019 |
-
|
|
---|---|---|---|
TASCAM EZ CONNECT | 11-06-2018 |
-
|