TM-200SG
Shotgun Microphone for Field Recording
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Easy to handle: compact and light weight form factor.
- Super-cardioid directivity.
- Built-in low-cut filter for wind or any other noise reduction.
- Operates with +48 phantom power supply.
- Element : Back Electret Condenser
- Polar pattern : Super-cardioid
- Frequency response : 30Hz - 20kHz
- Output impedance : 200Ω +/-30% (at 1kHz)
- Sensitivity : -40dB +/-3dB (0dB=1V/Pa at 1kHz)
- Max. SPL : 132dB (at 1kHz ≦ 1% THD)
- S/N ratio : 74dB (1kHz at 1Pa)
- TM-200SG
- Shoe-mount Mic Clip
- Storage Bag
- Windscreen
- Warranty
The videographer's choice for recording audio in the field
The TASCAM TM-200SG microphone is a compact shotgun microphone for vlogging, video shooting, and any situation where fixed audio isn't an option. The microphone delivers high-quality, mix-ready audio in a rugged, small form-factor.
Lightweight and small form factor for maximum audio quality with minimal visual intrusion
The TASCAM TM-200SG was designed to be heard, not seen. The perfect balance of audio replication and small form factor mean this microphone will be the least of your worries while shooting in the field.
Super-cardioid directivity for focused, clean audio
The TASCAM TM-200SG intelligently recognizes the audio you want to capture while leaving unwanted sounds behind. Post-production is a breeze with audio captured by the TASCAM TM-200SG.
Frequency response
Polar pattern
Built-in low cut filter for easy environmental noise reduction
Wind and environmental hum can reduce the quality of the audio and create headaches in post-production. By utilizing the natural-sounding low-cut filter, you're saving time downstream without cutting into vital frequencies you have captured.
Windscreen, mic clip with shock mount, and soft case included
Included are essential microphone accessories - a mic clip with shoe mount, and soft protective case allowing you to set up in the field and record right away.
Features at a Glance
- Easy to handle: compact and light weight form factor.
- Super-cardioid directivity.
- Built-in low-cut filter for wind or any other noise reduction.
- Operates with +48 phantom power supply.
Find a Local Dealer
LEARN MOREYou might also like
Spec Description
| Element | Back Electret Condenser |
| Polar pattern | Super-cardioid |
| Frequency response | 30Hz - 20kHz |
| Sensitivity | -40dB +/-3dB (0dB=1V/Pa at 1kHz) |
| Output impedance | 200Ω +/-30% (at 1kHz) |
| Low-cut filter | 3dB/oct at 160Hz |
| Output connector | 3 pin XLR, Male |
| S/N ratio | 74dB (1kHz at 1Pa) |
| Max. SPL | 132dB (at 1kHz ≦ 1% THD) |
| Power | 48V DC |
| Dimensions | 23 mm (Diameter) × 153 mm (L) |
| Weight | 53g (Microphone body only) |
| Included items | Windscreen, Mic clip with shoe mount, Soft case, Owner’s manual (warranty included) |
Frequency response
Polar pattern