TM-280
Studio Condenser Microphone
The world of recording has evolved rapidly in the last decade, but one thing hasn’t changed…
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condenser-type microphone
- Cardioid (Unidirectional)
- 34-mm aluminum diaphragm
- Mircrophone type : Condenser
- Diaphragm : 34mm Pure Gold-sputtered
- Polar Pattern : Cardioid (Unidirectional)
- Frequency response : 20Hz to 20,000Hz
- 20Hz to 20,000Hz : 50Ω +/-30%
- Load impedance : > 1kΩ
- Sensitivity : -36dB +/-2dB (0dB=1V/Pa at 1kHz)
- TM-280 x 1
- Suspension shockmount
- Pop filter
- Flight case
TASCAM's TM-280 is a high-performance, studio quality condenser microphone that features:
・switchable high-pass filter : allows the user to reduce rumble and eliminate low frequency energy when needed
・-10dB pad: drops the input volume when your signal is loud enough to distort the recording
These features, when combined with the pure gold-sputtered diaphragm, allows the TM-280 to gracefully capture performances ranging from a delicate acoustic session to the powerful levels of electric guitars, horns, percussion and drum kit overheads. And, while the TM-280 may be complex and sensitive on the inside, it is tough on the outside and built to last. Its premium components are protected by a durable internal construction on a stout framework, then encased in an aluminum shell and sturdy microphone mesh.
TASCAM has also ensured that this mic comes ready to rock by including a well-engineered shockmount with an integrated pop screen and a protective flight case.
Large Diaphragm – Ideal for vocal applications, the large, gold-plated 34mm diaphragm provides high sensitivity, low noise, and pristine clarity
Cardioid (unidirectional) Polar Pattern – Provides precise directional focus and increases the rejection of signal bleed
80dB SN Ratio – This top-performing spec is achieved by using high-end components and ensures ultra low-noise operation
-10dB Switch – When engaged, the -10db cut is used to help prevent clipping when recording high level sources
Low-Cut Filter Switch - The selectable Low-Cut filter is used to eliminate low-end noise for a cleaner mix
Shockmount and Pop Filter – These included essential tools are used to eliminate plosives and reduce unwanted traffic noise
Condenser vs. Dynamic microphones
TM-280 is a condenser-type microphone, which is quite different from a dynamic microphone which is typically used in live performances. The diaphragm essentially works with pneumatic vibrations. Inside of a dynamic microphone, the voice coil operates with the diaphragm, which increases the weight of the entire part. On the other hand, a condenser microphone incorporates a diaphragm in the either side of the electrode in an electrical part referred to as condenser, achieving a lightweight structure. This allows excellent follow-up performance, greatly contributing to high-precision sound. Thus, the mechanism to convert sound into electrical signals is different between the two: Dynamic microphones are powered by electromagnetic induction whereas condenser microphones take out static signals. To give condenser microphones the potential difference, power supply is required.
Features at a Glance
- Mircrophone type : Condenser
- Diaphragm : 34mm Pure Gold-sputtered
- Polar Pattern : Cardioid (Unidirectional)
- Frequency response : 20Hz to 20,000Hz
- 20Hz to 20,000Hz : 50Ω +/-30%
- Load impedance : > 1kΩ
- Sensitivity : -36dB +/-2dB (0dB=1V/Pa at 1kHz)
Find a Local Dealer
LEARN MORESpec Description
Mircrophone type | Condenser |
Diaphragm | 34mm Pure Gold-sputtered |
Polar Pattern | Cardioid (Unidirectional) |
Frequency response | 20Hz to 20,000Hz |
Output impedance | 50Ω +/-30% |
Load impedance | > 1kΩ |
Sensitivity | -36dB +/-2dB (0dB=1V/Pa at 1kHz) |
Max. SPL | 135dB |
S/N ratio | 80dB |
Connector | 3 pin XLR, Male × 1 |
Phantom power requirements | 48V |
Dimensions | 1.98" × 7.4" |
Weight | 14.7 oz. |
Included accessories | Suspension shockmount (5/8" fitting), Pop filter, Flight case, 5/8" to 3/8" conversion adapter |