VS-R265

Precautions related to updating the unit software
Always follow the procedures below when updating to Ver2.0.2.26.1. Failure to follow these procedures could result in making the unit unstartable. Procedures for updating from versions 1.0.0.7.1, 1.0.1.7.1, 1.0.2.7.1 and 1.1.0.7.1
If the unit is using one of the above versions, the procedures below must be followed to update it.
 Step 1: Update to Ver1.1.0.11.1 using an SD card
 Step 2: Update to Ver2.0.1.25.1 using an SD card or via the Internet
 Step 3: Update to Ver2.0.2.26.1 using an SD card or USB flash drive
 Note: Updates in steps 1 and 3 cannot be conducted via the Internet. Procedures for updating from versions other than 1.0.0.7.1, 1.0.1.7.1, 1.0.2.7.1 or 1.1.0.7.1
If the unit is using a version other than one of the above, the procedures below must be followed to update it.
 Step 1: Update to Ver2.0.1.25.1 using an SD card or via the Internet
 Step 2: Update to Ver2.0.2.26.1 using an SD card or USB flash drive
 Note: The update in step 2 cannot be conducted via the Internet. Be careful because updating from Ver1.x.x to Ver2.0.1.25.1 will restore all settings, including network settings, to their default values.
For details, see the "Software Update Procedures Rev.E".

• RTMP 1/2/3 can now be controlled simultaneously by turning the STREAM button on/off.
• “Quality/Latency” can now be selected even with H.265 (HEVC) encoding.
• MP4 can now be selected for the video recording file format.
• The maximum files size when recording to external storage has been increased from 2 GB to 4 GB.
• Recording to 17 GB of internal storage is now possible.
• If the storage becomes full, files can now be automatically deleted starting from the oldest time stamp, and recording can be continued.

• If “Limit Max File Size” was OFF and the internal storage was completely filled, file deletion and further recording to the internal storage would become impossible. This has been fixed.
  Files recorded on the internal storage can be deleted by executing a hardware reset.
  Be careful because execution of a hardware reset will restore all settings, including network settings, to their default values.

ATTENTION:
To use the VS-R264/VS-R265 with Ver2.0.2.26.1, TASCAM DISCOVERY control software must be updated to V2.
When recording to the internal storage using Ver2.0.1.25.1, if “Limit Max File Size” is OFF and the entire 17 GB of internal memory is full, file deletion and further recording to the internal storage will become impossible.

Cautions:
Although the update file name is the same for both VS-R264 and VS-R265, their contents are different.
Using the wrong file on the wrong unit may cause damage and/or malfunctions so be careful when handling these.